Description
- Industry leading 3 YEAR WARRANTY
- Combo (Symmetrical and Asymmetrical) Arm Assembly with Adjustable Screw Pads!
- CE Certified Lift Structure and Hydraulic System – Tested 115% Dynamic Load Capacity and 150% Static Load Capacity
- One Set of 4″ Tall Truck Adapters Included; 6’9″ Lift Height Maximum with Truck Adapters
- All Robot Welded Structure with Durable Powder Coated Finish
APlusLift HW-10KBP-A car lift (auto hoist) is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity.
Specifications
- Overall Height: 113 5/8″
- Overall Width: 134 5/16″
- Maximum Lift height with Truck Adapters: 81″
- Maximum Lift height without Truck Adapters: 75″
- Minimum Height of Arm Top: 4.5″
- Drive Through Width (Carriage to Carriage): 100″
- Column to Column Width: 109″
- Column Cross Section: 11″L x 7″W
- Floor Plate Cross Section: 10 5/8″W x 1 7/8″H
- Driving Mode: Dual hydraulic cylinders, chain drive
- Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
- Hydraulic Oil: 3-5 gallons AW32/AW46 (Not Included in the Package)
- Lifting Capacity: 10,000 LB
- Time to full rise: 50 sec
- Combo (Symmetrical and Asymmetrical) Arm Assembly
- Straight Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
- Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″
- 4 Pieces of Adjustable Screw Pads Included
- 4 Pieces of 4″ Tall Truck Adapters (Height Extensions) Included
- Shipping Weight: 1,350 LB
- Shipping package size: 113″L x 22″W x 40″H
- Concrete Requirement: 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)
- 10 anchor bolts and 10 shims included
- Tool trays and toe guards included
- Column Steel Thickness: 13/64″
- Carriage Steel Thickness: 15/64″
- Carriage Yoke Thickness: 9/16″
- Arm Steel Thickness: 15/64″
- Base Plate Steel Thickness: 5/8″
Features
- CE Certified Lift Structure and Hydraulic System
- Third party tested with a dynamic load capacity of 115%
- Third party tested with a static load capacity of 150%
- Durable hydraulic system
- Easy to operate and maintain
- Double point safety lock release
- Double Seal Rings Protecting PU Material
- Carriage Material Q355 (ASTM A572), Stronger Than Normal Q235 Steel
- Lifting operation by pressing “UP” button on motor
- Manual lowering operation by pressing lever
- Relief valve built in power pump to prevent overloading
- Automatic arm lock restraints
- Relief valve built in power pump to prevent overloading
- Door guards protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
- Upgraded Floor Plate, Beveled Diamond Plate Steel 5/32″ with Supporting Bracket.
- Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Reviews
There are no reviews yet.